
SPD / AC SPD
AC 4P SPD
TPKELE AC 4P SPD is a four-pole surge protective device engineered for three-phase + neutral AC distribution systems. Designed for commercial buildings, industrial facilities, and inverter AC outputs, it delivers Type 2 surge protection across all four conductors (L1, L2, L3, N) with independent pluggable cartridges for each pole. The modular design enables selective cartridge replacement without system downtime, while quadruple visual status windows provide instant operational feedback for each phase and neutral. Clear terminal labeling (L1, L2, L3, N) simplifies installation and reduces wiring errors in busy panel builds. Ideal for three-phase distribution boards, inverter outputs, telecom base stations, and any AC system requiring comprehensive multi-pole surge defense.
Key Features
- 4-pole (L1, L2, L3, N) configuration for three-phase + neutral systems
- Uc 385V AC — covers standard 400V three-phase networks
- In 20kA / Imax 40kA (8/20μs) — Type 2 protection level
- Independent pluggable cartridges per pole for selective replacement
- Quadruple visual status indicators (green = OK, red = replace)
Need full datasheet, drawing or certificates for tender?
Typical Applications
Technical Specifications
| Product Type | 4-Pole AC Surge Protective Device (Type 2) |
|---|---|
| Model | AC 4P SPD |
| Pole Configuration | 4P (L1, L2, L3, N) |
| Max. Continuous Operating Voltage (Uc) | 385V AC |
| Nominal Discharge Current (In) | 20kA (8/20μs) |
| Max. Discharge Current (Imax) | 40kA (8/20μs) |
| Voltage Protection Level (Up) | ≤1.5kV |
| Response Time | <25ns |
| Protection Type | Type 2 (IEC 61643-11) |
| Status Indication | Quadruple visual window per pole (Green = Normal / Red = Fault) |
| Cartridge Type | Pluggable per pole, tool-free replacement |
| Remote Signaling | Optional NC/NO contact output |
| Mounting | 35mm DIN rail (IEC/EN 60715) |
| Width | 72mm (4 modules) |
| Connection | Screw terminal, 6–25mm² cable capacity |
| Torque | 2.5 N·m |
| Protection Degree | IP20 (when mounted) |
| Operating Temperature | −40°C to +85°C |
| Housing Material | Flame-retardant thermoplastic, UL94 V-0 |
| Standards Compliance | IEC 61643-11, EN 61643-11 |
| Certifications | CE, RoHS |
| Applications | Three-phase distribution boards, inverter AC outputs, commercial buildings, industrial facilities, telecom base stations |
Certifications & Standards
Verified to international standards for global tenders
OEM / ODM Available
Private label this SPD for your brand
Logo, color housing, packaging and certificate documentation tailored to distributor and brand-owner programs.
- Custom logo printing on housing and packaging
- Color housing variants for product line differentiation
- Private-label catalogs and datasheet customization
- Project-spec drawings, single-line diagrams and labels
- Container-load supply with export documentation
- Sample preparation within 5–10 working days
Frequently Asked Questions
Which SPD type do I need for a solar PV project?
PV strings, combiner boxes and inverter DC inputs require DC SPDs sized to the system Uoc (600V / 1000V / 1500V). Inverter AC outputs and the building distribution board use AC SPDs (Type 2 standard, Type 1+2 if direct lightning exposure is possible).
What is the difference between Type 1, Type 2 and Type 1+2?
Type 1 (10/350μs waveform) protects against direct lightning strike currents at the building entrance. Type 2 (8/20μs) protects against induced surges downstream. Type 1+2 combines both — used at the main distribution board when a lightning protection system is present.
What does Imax / In mean on an SPD?
In = nominal discharge current (8/20μs) the SPD can pass repeatedly. Imax = maximum one-shot discharge current the SPD can handle once and remain functional. Choose In/Imax based on lightning exposure and project specs.
Are TPKELE SPDs CE certified?
Yes — all SPDs comply with CE, RoHS and IEC 61643-11 (AC) / IEC 61643-31 (DC PV). Test reports are available for project files and tenders.
Do you offer SPDs with remote signaling output?
Yes, selected models include a remote signaling contact (NO/NC) so you can monitor SPD health from a central control system or BMS.
What is the difference between Type 1 SPD and Type 2 SPD?
Type 1 SPDs (tested with 10/350μs impulse current) protect against direct lightning strike currents at the building service entrance. Type 2 SPDs (tested with 8/20μs waveform) protect against induced surges downstream in distribution boards. Type 1 is installed at the main incomer where lightning protection system (LPS) is present; Type 2 is standard for sub-distribution boards. Type 1+2 combined devices are available where both functions are needed at one location. Read our complete guide: Type 1 SPD vs Type 2 SPD selection.
Do I need both AC SPD and DC SPD for a solar PV system?
Yes — solar systems require protection on both DC and AC sides. Install DC SPDs rated for the system open-circuit voltage (Uoc) on PV strings, combiner box outputs and inverter DC inputs. Install AC SPDs (Type 2) on the inverter AC output and the building AC distribution board. DC SPDs must be sized to the PV system voltage (600V / 1000V / 1500V Uoc); AC SPDs are selected based on the AC system voltage (230V / 400V). View our DC SPD series for PV applications.
How do I know when an SPD needs replacement?
TPKELE SPDs feature a visual status window (typically green = OK, red = replace) for quick field inspection. Selected models include a remote signaling contact (dry contact, NO/NC configurable) that changes state when the SPD fails, allowing integration with BMS or alarm systems. Pluggable cartridge designs allow fast field replacement without removing the base unit. Check SPD status during routine maintenance — a failed SPD offers no protection and should be replaced immediately.
Applications
Where This Product Is Used
AC Distribution Box
Inverter AC output and feeder boxes built with TPKELE AC MCBs and 4P SPDs.
→Project: Mongolia Solar + Storage
11 AC distribution boxes with a 4P breaker and 4P SPD on every inverter output.
→Custom Distribution Boxes
Send your single-line diagram; we propose the layout and bill of materials.
→Need it pre-assembled? Build an AC box with this component online.
Configure online →

