SPD / AC SPD

AC 4P SPD

TPKELE AC 4P SPD is a four-pole surge protective device engineered for three-phase + neutral AC distribution systems. Designed for commercial buildings, industrial facilities, and inverter AC outputs, it delivers Type 2 surge protection across all four conductors (L1, L2, L3, N) with independent pluggable cartridges for each pole. The modular design enables selective cartridge replacement without system downtime, while quadruple visual status windows provide instant operational feedback for each phase and neutral. Clear terminal labeling (L1, L2, L3, N) simplifies installation and reduces wiring errors in busy panel builds. Ideal for three-phase distribution boards, inverter outputs, telecom base stations, and any AC system requiring comprehensive multi-pole surge defense.

Key Features

  • 4-pole (L1, L2, L3, N) configuration for three-phase + neutral systems
  • Uc 385V AC — covers standard 400V three-phase networks
  • In 20kA / Imax 40kA (8/20μs) — Type 2 protection level
  • Independent pluggable cartridges per pole for selective replacement
  • Quadruple visual status indicators (green = OK, red = replace)

Need full datasheet, drawing or certificates for tender?

Typical Applications

PV combiner boxes & inverter DC inputsAC distribution boards & sub-panelsTelecom cabinets & base stationsInverter AC outputs & grid-tie connectionsIndustrial process & data-center power

Technical Specifications

Product Type4-Pole AC Surge Protective Device (Type 2)
ModelAC 4P SPD
Pole Configuration4P (L1, L2, L3, N)
Max. Continuous Operating Voltage (Uc)385V AC
Nominal Discharge Current (In)20kA (8/20μs)
Max. Discharge Current (Imax)40kA (8/20μs)
Voltage Protection Level (Up)≤1.5kV
Response Time<25ns
Protection TypeType 2 (IEC 61643-11)
Status IndicationQuadruple visual window per pole (Green = Normal / Red = Fault)
Cartridge TypePluggable per pole, tool-free replacement
Remote SignalingOptional NC/NO contact output
Mounting35mm DIN rail (IEC/EN 60715)
Width72mm (4 modules)
ConnectionScrew terminal, 6–25mm² cable capacity
Torque2.5 N·m
Protection DegreeIP20 (when mounted)
Operating Temperature−40°C to +85°C
Housing MaterialFlame-retardant thermoplastic, UL94 V-0
Standards ComplianceIEC 61643-11, EN 61643-11
CertificationsCE, RoHS
ApplicationsThree-phase distribution boards, inverter AC outputs, commercial buildings, industrial facilities, telecom base stations

Certifications & Standards

Verified to international standards for global tenders

CE MarkingEU low voltage & EMC directives
RoHS CompliantRestricted hazardous substances
IEC Standards60898 / 60947 / 61643 / 62052
ISO 9001Quality management system
TÜV TestedIndependent lab verification
CB SchemeGlobally recognized test report

OEM / ODM Available

Private label this SPD for your brand

Logo, color housing, packaging and certificate documentation tailored to distributor and brand-owner programs.

  • Custom logo printing on housing and packaging
  • Color housing variants for product line differentiation
  • Private-label catalogs and datasheet customization
  • Project-spec drawings, single-line diagrams and labels
  • Container-load supply with export documentation
  • Sample preparation within 5–10 working days

Frequently Asked Questions

Which SPD type do I need for a solar PV project?

PV strings, combiner boxes and inverter DC inputs require DC SPDs sized to the system Uoc (600V / 1000V / 1500V). Inverter AC outputs and the building distribution board use AC SPDs (Type 2 standard, Type 1+2 if direct lightning exposure is possible).

What is the difference between Type 1, Type 2 and Type 1+2?

Type 1 (10/350μs waveform) protects against direct lightning strike currents at the building entrance. Type 2 (8/20μs) protects against induced surges downstream. Type 1+2 combines both — used at the main distribution board when a lightning protection system is present.

What does Imax / In mean on an SPD?

In = nominal discharge current (8/20μs) the SPD can pass repeatedly. Imax = maximum one-shot discharge current the SPD can handle once and remain functional. Choose In/Imax based on lightning exposure and project specs.

Are TPKELE SPDs CE certified?

Yes — all SPDs comply with CE, RoHS and IEC 61643-11 (AC) / IEC 61643-31 (DC PV). Test reports are available for project files and tenders.

Do you offer SPDs with remote signaling output?

Yes, selected models include a remote signaling contact (NO/NC) so you can monitor SPD health from a central control system or BMS.

What is the difference between Type 1 SPD and Type 2 SPD?

Type 1 SPDs (tested with 10/350μs impulse current) protect against direct lightning strike currents at the building service entrance. Type 2 SPDs (tested with 8/20μs waveform) protect against induced surges downstream in distribution boards. Type 1 is installed at the main incomer where lightning protection system (LPS) is present; Type 2 is standard for sub-distribution boards. Type 1+2 combined devices are available where both functions are needed at one location. Read our complete guide: Type 1 SPD vs Type 2 SPD selection.

Do I need both AC SPD and DC SPD for a solar PV system?

Yes — solar systems require protection on both DC and AC sides. Install DC SPDs rated for the system open-circuit voltage (Uoc) on PV strings, combiner box outputs and inverter DC inputs. Install AC SPDs (Type 2) on the inverter AC output and the building AC distribution board. DC SPDs must be sized to the PV system voltage (600V / 1000V / 1500V Uoc); AC SPDs are selected based on the AC system voltage (230V / 400V). View our DC SPD series for PV applications.

How do I know when an SPD needs replacement?

TPKELE SPDs feature a visual status window (typically green = OK, red = replace) for quick field inspection. Selected models include a remote signaling contact (dry contact, NO/NC configurable) that changes state when the SPD fails, allowing integration with BMS or alarm systems. Pluggable cartridge designs allow fast field replacement without removing the base unit. Check SPD status during routine maintenance — a failed SPD offers no protection and should be replaced immediately.

Applications

Where This Product Is Used

Need it pre-assembled? Build an AC box with this component online.

Configure online →