Voltage Protector

Voltage Protector Manufacturer — Over & Under Voltage Protection

TPKELE voltage protectors monitor incoming mains and disconnect downstream loads when voltage moves outside safe limits. Single-phase and three-phase versions on DIN rail protect refrigerators, AC, motors and electronics from over-voltage, under-voltage and phase-loss events — a high-volume product for distributors serving regions with unstable grid quality.

  • Automatic disconnect on over-voltage and under-voltage
  • Adjustable trip thresholds and reconnection delay
  • Single-phase and three-phase DIN-rail models
  • Phase-loss / phase-sequence detection (3-phase)
  • Auto reset after voltage returns to safe range
  • CE & RoHS compliant — high-volume distributor stock item
Residential consumer units in unstable grid marketsLight commercial & retail circuitsMotor and pump protectionSensitive appliances (refrigeration, HVAC)Emerging-market distributor stock programs
Voltage Protector products

Typical Applications

Residential consumer units in unstable grid marketsLight commercial & retail circuitsMotor and pump protectionSensitive appliances (refrigeration, HVAC)Emerging-market distributor stock programs

Technical Specifications

Product TypeSelf-Resetting Over/Under Voltage Protector
ModelPN2-VA2
Rated Supply VoltageAC 220V (AC 110V Customizable)
Rated Frequency40 / 50 / 60 / 70Hz
Over-Voltage Setting RangeAC 130–300V
Under-Voltage Setting RangeAC 80–210V
Over-Voltage Trip Delay0.5 Seconds
Voltage Accuracy<1%
Max. Working Current40A / 63A / 80A (Optional)
Reset Delay Time0–999 Seconds (Adjustable, Default 60s)
Display ModeDual Digital Display — Voltage (Red) + Current (Green)
Password ProtectionSupported — prevents unauthorized parameter changes
Energy-Saving ModeSwitchable
Housing MaterialFlame-retardant PC (UL94 V-0)
Dimensions81 × 36 × 66mm
Installation35mm DIN Rail
Ambient Temperature-25°C to +55°C
Permitted Relative Humidity≤50% at 40°C (Non-condensing)
Mechanical Life≥10,000 Cycles
Protection FunctionsOver-voltage, Under-voltage, Over-current, Delay Protection
OEM CustomizationLogo customization supported
ApplicationResidential Distribution Boards, Light Commercial Premises, Home Appliance Protection
ConformityCE marking, RoHS compliant

Certifications & Standards

Verified to international standards for global tenders

CE MarkingEU low voltage & EMC directives
RoHS CompliantRestricted hazardous substances
IEC Standards60898 / 60947 / 61643 / 62052
ISO 9001Quality management system
TÜV TestedIndependent lab verification
CB SchemeGlobally recognized test report

OEM / ODM Available

Private label this Voltage Protector for your brand

Logo, color housing, packaging and certificate documentation tailored to distributor and brand-owner programs.

  • Custom logo printing on housing and packaging
  • Color housing variants for product line differentiation
  • Private-label catalogs and datasheet customization
  • Project-spec drawings, single-line diagrams and labels
  • Container-load supply with export documentation
  • Sample preparation within 5–10 working days

Frequently Asked Questions

When should I install a voltage protector?

Voltage protectors are recommended where mains supply is unstable or where sensitive appliances such as refrigerators, air conditioners and electronics need protection from voltage fluctuations and phase-loss events.

Does the voltage protector reset automatically?

Yes — after the mains voltage returns to a safe range, the protector reconnects the load automatically after a configurable delay (typically 5–600s).

Do you have three-phase models with phase-loss protection?

Yes, our three-phase voltage protectors detect over/under voltage on each phase, plus phase loss and phase sequence errors.

What is the difference between a voltage protector and a surge protector (SPD)?

A voltage protector disconnects loads during sustained over-voltage or under-voltage conditions (lasting seconds or longer), protecting against brownouts and voltage swings. A surge protector (SPD) handles transient voltage spikes lasting microseconds, caused by lightning or switching events. For complete protection, use both: install an AC SPD at the distribution board incoming supply and voltage protectors on sensitive branch circuits. View our AC SPD series for surge protection solutions.

What is the difference between a voltage protector and a voltage stabilizer?

A voltage protector disconnects the load when voltage goes outside safe limits and reconnects automatically when voltage returns to normal. A voltage stabilizer (AVR) continuously adjusts output voltage to maintain a steady level regardless of input fluctuations. Voltage protectors are simpler, more affordable and suitable where occasional disconnection is acceptable; stabilizers are used where continuous operation is critical (medical equipment, data centers).

Can I use a voltage protector with an automatic transfer switch (ATS)?

Yes — voltage protectors are commonly installed downstream of an ATS to protect loads from voltage fluctuations when switching between mains and generator supply. This combination is standard in hospitals, data centers and commercial buildings with backup power. Install the voltage protector after the ATS output, and size it to match the load current. View our ATS series for dual-power backup solutions.

Do I need a voltage protector if I already have an AC MCB installed?

Yes — AC MCBs provide overload and short-circuit protection but do not protect against sustained over-voltage or under-voltage. In markets with unstable grid quality, the standard protection layout combines an upstream AC MCB (for overcurrent faults) with a downstream voltage protector (for voltage quality). This protects sensitive appliances like refrigerators, air conditioners and electronics from both fault currents and voltage swings.

What voltage levels trigger the voltage protector to disconnect?

TPKELE voltage protectors have adjustable trip thresholds. For 230V single-phase systems, typical factory settings are: over-voltage trip at 260V–275V, under-voltage trip at 170V–200V. Three-phase 400V models have corresponding thresholds for each phase. The reconnection delay (typically 30s–300s, adjustable 5s–600s) prevents repeated cycling during short-duration voltage instability.

Need the voltage protector pre-assembled in a box? Build your AC box online.

Configure online →